Derating Curve
Current Sense Resistor

Environmental CharacteristicsLow Ohmic Resistor
Item Specification Test Method
Temperature Coefficient of Resistance (T.C.R) As Spec MIL-STD-202F Method 304
+25/-55/+25/+125/+25°C
Short Time Overload ±0.5% JIS-C-5202-5.5
RCWV*2.5 or Max Overloading Voltage 5 seconds
ΔR±1% for high power rating
Insulation Resistance >1000MΩ MIL-STD-202F Method 302
Apply 100VDC for 1 minute
Endurance ±1% 70±2°C, Max. working voltage for 1000 hrs with 1.5 hrs "ON" and 0.5 hrs "OFF"
Damp Heat with Load ±0.5% 40±2°C,90~95% R.H. Max. working voltage for 1000 hrs with 1.5 hrs "ON" and 0.5 hrs "OFF"
Dry Heat ±0.5% JIS-C-5202-7.2
at +155°C for 1000 hrs
Bending Strength As Spec JIS-C-5202-6.1.4
Bending Amplitude 3mm for 10seconds
Solderability 95%min coverage MIL-STD-202F Method 208H
245°C±5°C, 3 seconds
Resistance to Soldering Heat ±0.5% MIL-STD-202F Method 210E
260±5°C, 10 second
Dielectric Withstand Voltage By Type MIL-STD-202F Method 301
Apply Max Overload Voltage for l minute
Thermal Shock ±0.5% MIL-STD-202F Method 107G
-55°C~150°C, 100cycles
Low Temperature Operation ±0.5% JIS-C-5202-7.1
1hour, -65°C followed by 45minutes of RCWV
Note: Storage Temperature: 25±3°C; Humidity: <80%RH

How to Order
CS 05 F TR F V R680  
Part Number
CS
Dimensions (L×W)
(mm)
01 0201(0.58×0.29mm)
02 0402(1.00×0.50mm)
03 0603(1.60×0.80mm)
05 0805(2.00×1.25mm)
06 1206(3.10×1.55mm)
13 1210(3.00×2.50mm)
10 2010(5.00×2.50mm)
12 2512(6.30×3.10mm)
25 1225(3.10×6.30mm)
37 3720(3.75×2.00mm)
75 7520(7.50×2.00mm)
Resistance Tolerance (%)
J ±5%
G ±2%
F ±1%
Package
P Bulk
TR Taping Reel
TCR
(ppm/°C)
E ±100ppm/°C
K ±150ppm/°C
F ±200ppm/°C
G ±300ppm/°C
H ±400ppm/°C
J ±600ppm/°C
R ±1000ppm/°C
Power Rating (W)
Standard
S 2W
A 1.5W
T 1W
Q 3/4W
U 1/2W
V 1/4W
W 1/8W
Resistance
(Ω)
R010 0.010Ω
R100 0.100Ω
1R00 1.000Ω
Marking
Standard
N No Marking



- To Top Page
Page: 北京单场奖金怎么算 / 2 / 3


Direct Electronics Tech. Co., Ltd.
Taiwan Tel:+886-2-29810109 Fax:+886-2-29887487
China Tel:+86-755-26055363 Fax:+86-755-26055365