Environmental Characteristics
Item Specification Test Methods
Flexure Strength The forces applied on the right conditions must not damage the terminal electrode and the ferrite Test device shall be soldered on the substrate Substrate Dimension:100×40×1.6mm
Deflection: 2.0mm
Keeping Time: 30sec
For 0402, substrate dimension is 100×40×0.8mm
Vibration Test device shall be soldered on the substrate
Oscillation Frequency : 10 to 55 to 10Hz for 1min Amplitude : 1.5mm
Time : 2hrs for each axis (X,Y&Z), total 6hrs
Resistance to Soldering Heat Appearance: No damage
More than 75% of the terminal electrode should be covered with solder.
Impedance: within ± 30% of initial value
Pre-heating: 150°C, 1min
Solder Temperature: 260 ± 5°C
Immersion Time: 10 ± 1sec
Solderability The electrodes shall be at least 90% covered with new solder coating Pre-heating: 150°C, 1min
Solder Temperature: 245 ± 5°C
Immersion Time: 4 ± 1sec
Terminal Strength Test 0402 series : ≥ 0.2kg
0603 series : ≥ 0.5kg
0805 series : ≥ 1.0kg
other series : ≥ 2.0kg
Test device shall be soldered on the substrate
Temperature Cycle Appearance: No damage Impedance: within ± 30% of initial value One cycle:
One cycle/step1: -55 ± 3°C for 30min
step2: 25 ± 2°C for 3.0min
step3:125 ± 3°C for 30min
step4:25 ± 2°C for 3.0min
Total: 100cycles
Measured after exposure in the room condition for 24hrs
Humidity Resistance Temperature: 40 ± 2°C
Relative Humidity: 90 ~ 95% time: 1000hrs
Measured after exposure in the room condition for 24hrs
High Temperature Resistance Temperature: 125 ± 3°C
Relative Humidity : 0%
Applied Current: Rated Current time: 1000hrs
Measured after exposure in the room condition for 24hrs
Low Temperature Resistance Temperature: -55 ± 3°C
TR elative Humidity : 0% time: 1000hrs
Measured after exposure in the room condition for 24hrs

How to Order - Multilayer Chip Beads Inductor
TRMB160808 Y TR Y N 060
Part Number
TRMB100505
TRMB160808
TRMB201209
TRMB321611
TRMB322513
TRMB451616
TRMB453215
Impedance Tolerance
Y ± 25%
M ± 20%
Package
TR Taping Reel
Design Code
Y ui:200
Q ui:75
Current
H High Current
N General Current
Impedance
060 6 Ω
100 10 Ω
330 33 Ω
152 1500 Ω


To Top Page - Multilayer Chip Beads Inductors
Page: 1 / 2 / 3 / 北京单场奖金怎么算 / 5 / 6


Direct Electronics Tech. Co., Ltd.
Taiwan Tel:+886-2-29810109 Fax:+886-2-29887487
China Tel:+86-755-26055363 Fax:+86-755-26055365